MCC DX 47mm – Clincher, Disc Brake

Designed for ultimate performance on hilly courses

The MCC DX answers our desire to develop the disc wheel set able to cover all aspects of very high performance. Lightweight for fast climbing, optimal stiffness for improved performance, an unprecedented level of responsiveness for fast acceleration and optimized aerodynamics.

At 47mm, the MCC DX pushes the limits of performance on hilly courses. In addition to its iconic appearance, the MCC DX is also the most innovative and highest performing product on the market.

Depth: 47mm
Rim Width: 26mm
Thru Axle: 12mm x 100mm front, 12mm x 142mm rear
Weight: 760g front | 890g rear
Carbon Weave: 3K
Spokes: 20 front | 20 rear
Integrated Magnet

Tire Air Pressure

Do not remove the tire with any metal tool.
The minimum tire section is 23 mm and the maximum 32 mm.
For comfort and performance we recommend fitting 23 mm section tires on our 22.6 mm wide rims and 25 mm section tires on our 26 mm wide rims.
The original CORIMA braided rim tape is mandatory. If it is damaged it must be the replaced.
CORIMA clincher wheels are not compatible with tubeless conversion kits.
Only tires with inner tubes are acceptable (except latex inner tubes).
Co2 cartridge inflation systems are only allowed if their flow rate is adjustable. Instant inflation cartridges are prohibited with CORIMA wheels.
 If the tire manufacturer indicates a pressure lower than that in the table, use this lower value.