No products in the cart
WS1 47MM Clincher for Track

Our 47mm track training wheel
We have chosen to develop the WS1 range to meet the needs of track riders in training.
In 47mm it offers an intermediate size profile with a good compromise between aerodynamics and lightness.
Front Wheel $900 , Rear Wheel $950 , Pair $1850
Find a Corima dealer
Data
622x16c clincher
Profile : 47MM
Rim width : 26mm
Axle : Axle Ø9 x 100mm + 2 screws M6 x 25mm + 2 bolts Ø20mm – front, Axle Ø10 x 120mm + 2 track screws – rear
Weight : 850 g – front, 1100 g rear
Carbon weave : 3K
Spokes : 24 front, 24 rear
Shipped with
Rim tape
Protection wheelbag
Spoke wrench
Valve extender
Track bolts
Tire Guidance
Do not remove the tire with any metal tool.
The minimum tire section is 23 mm and the maximum 32 mm.
For comfort and performance we recommend fitting 23 mm section tires on our 22.6 mm wide rims and 25 mm section tires on our 26 mm wide rims.
The original CORIMA braided rim tape is mandatory. If it is damaged it must be replaced.
CORIMA clincher wheels are not compatible with tubeless conversion kits.
Only tires with inner tubes are acceptable (except latex inner tubes).
CO2 cartridge inflation systems are only allowed if their flow rate is adjustable. Instant inflation cartridges are prohibited with CORIMA wheels.
If the tire manufacturer indicates a pressure lower than that in the table, use this lower value.
Tire Air Pressure
Tire section mm |
max. pressure (bar) |
max. pressure (psi) |
---|---|---|
23 | 7,8 | 113 |
24 | 7,5 | 109 |
25 | 7,3 | 106 |
26 | 7,0 | 102 |
27 | 6,8 | 99 |
28 | 6,6 | 95 |
29 | 6,3 | 92 |
31 | 6,1 | 88 |
31 | 5,8 | 85 |
32 | 5,6 | 81 |